Technical Specifications¶
This section provides detailed technical specifications for the MeshDisplay device.
Hardware Specifications¶
Processor and Memory¶
- SoC:
Espressif ESP32-S3 (dual-core, 240 MHz)
- PSRAM:
8 MB OPI (octal) PSRAM
- Flash:
16 MB (two 4 MB software slots for safe updates; about 7.9 MB for messages and the map cache)
Wireless Connectivity¶
- Bluetooth:
Bluetooth 5 Low Energy (central role); encrypted link with passkey (PIN) pairing
- Wi-Fi Standard:
IEEE 802.11 b/g/n
- Frequency Band:
2.4 GHz only (5 GHz not supported)
- Wi-Fi Security:
WPA, WPA2, WPA2/WPA3 mixed
- Antenna:
On-board PCB antenna
Note
MeshDisplay does not contain a LoRa radio. It is the display for a separate Meshtastic radio, which does all transmitting on the mesh.
Display¶
- Type:
7-inch IPS colour LCD (RGB parallel)
- Resolution:
800 x 480 pixels
- Backlight:
White LED (dimmable on supported hardware)
- Touch Panel:
Capacitive multi-touch
- Surface:
Glass
Power Requirements¶
- Input Voltage:
5 V DC ±5% (via USB-C)
- Input Current:
500 mA typical, ~1 A peak
- Power Consumption:
2–4 W typical
- Connector:
USB-C
- Battery Support:
Via USB-C power bank (not included)
Warning
Use only a quality 5 V USB-C power supply rated for at least 1 A. Insufficient power may cause restarts, display flicker, or instability.
Physical Specifications¶
- Form factor:
7-inch landscape tablet-style enclosure
- Mounting:
Desktop or shelf; supports 180° screen rotation for inverted mounting
- Environmental Rating:
Indoor use only
Operating Environment¶
- Operating Temperature:
0 °C to 40 °C (32 °F to 104 °F)
- Storage Temperature:
−20 °C to 60 °C (−4 °F to 140 °F)
- Humidity:
20% to 80% RH non-condensing
- Altitude:
Up to 2000 m
Meshtastic Specifications¶
- Radio Interface:
Meshtastic client API over Bluetooth LE (the interface used by the Meshtastic phone apps)
- Compatible Radios:
Meshtastic radios with Bluetooth (ESP32 and nRF52 based) running Meshtastic firmware 2.x
- Paired Radios:
Up to 8 (one connected at a time)
- Channels:
Up to 8 (as configured on the radio)
- Nodes Shown:
Up to 300
- Chats:
Up to 64 (channels and direct-message conversations)
- Message Length:
Up to 200 characters (UTF-8 bytes)
- Message History:
Newest 1,500 messages per radio, kept in flash
- Message Status:
Queued, sent, delivered (direct messages), not delivered
- Character Sets:
Latin, Latin Extended-A and Cyrillic (theme dependent), plus monochrome emoji
Map¶
- Map Data:
OpenStreetMap raster tiles (256 px, Web Mercator)
- Zoom Levels:
2 (whole Earth) to 17 (street level)
- Tile Cache:
Up to about 3 MB in flash, plus 18 tiles in memory
- Offline:
Cached tiles, or a plain grid with nodes at true positions
MQTT Gateway¶
- Mode:
Meshtastic MQTT client proxy (the radio's MQTT traffic is relayed over the display's Wi-Fi)
- Protocol:
MQTT 3.1.1, plain (port 1883) or TLS (port 8883)
- Broker:
As configured on the radio; default
mqtt.meshtastic.org
Network Specifications¶
Supported Protocols¶
- Software Updates:
HTTPS (TCP port 443) to
u.topbytes.net- Map Tiles:
HTTPS (TCP port 443) to
tile.openstreetmap.org- MQTT Gateway:
MQTT (TCP port 1883 or 8883) to the configured broker
- Time Sync:
NTP (UDP port 123)
- DNS:
UDP port 53
Time Synchronisation¶
- Sources:
The connected Meshtastic radio; NTP (
pool.ntp.org,time.google.com)- Timezone:
Configurable (18 worldwide zones, automatic DST)
- Clock Display:
Local
HH:MM
Configuration Limits¶
- Max Wi-Fi Networks:
3
- Max Paired Radios:
8
- Brightness Range:
10–100% (dimmable hardware)
- Screen-Off Timeout:
Never, 1, 5, 15, 30 or 60 minutes
Performance Specifications¶
- Cold Boot:
a few seconds to the main screen
- Radio Connection:
a few seconds to connect and pair; loading the node list takes longer on a large mesh
- Bluetooth Reconnection:
automatic, 5 s rising to 60 s between attempts
- Wi-Fi Connection:
5–30 seconds (network dependent)
- Watchdog Timer:
Yes
- OTA Failure Handling:
Failed updates leave the running software untouched
Compatibility¶
Wi-Fi Router Compatibility¶
- Compatible With:
All 2.4 GHz 802.11 b/g/n routers
WPA / WPA2 / WPA2-WPA3 mixed
Most home and portable routers (including phone hotspots)
- Not Compatible With:
5 GHz only networks
WPA3-only networks (use WPA2/WPA3 mixed mode)
Enterprise Wi-Fi with 802.1X
Captive portals requiring web-form authentication after joining
Power Source Compatibility¶
- Compatible With:
USB-C wall adapters (5 V, ≥1 A)
USB-C ports on computers
USB-C power banks
USB-C car chargers
- Not Recommended:
Charge-only USB-C cables (won't expose the serial console)
Supplies under 1 A — display flicker likely
Data Sources and Software¶
Map tiles and map data: © OpenStreetMap contributors (ODbL)
Fonts: Montserrat, Exo 2, Orbitron, Antonio, Nunito, Fredoka and Noto Emoji (SIL Open Font License)
Libraries: LVGL (MIT), nanopb (zlib), PubSubClient (MIT), ArduinoJson (MIT), lodepng (zlib)
These are independent sources not affiliated with TopBytes Ltd. Meshtastic® is a registered trademark of Meshtastic LLC.
Support and Documentation¶
User Manual: This document
Product Website: https://meshdisplay.topbytes.net
Company Website: https://www.topbytes.net
Support Email: support@topbytes.net